|
|
|
|
Surveyor
| SNO. |
Name of Trade |
Surveyor |
| 1. |
N.C.O. Code No. |
023, 10 , 037, 10, 037, 200020 |
| 2. |
Duration of Craftsmen Training |
ONE YEAR |
| 3. |
Duration of Apprenticeship Training |
3 years including Basic Training of two years |
| 4. |
Entry Qualification |
Pass in 10 Class examination under 10+2 system of Education with Science and Maths. |
| 5. |
Rebate for Ex-Craftsmen Trainee |
Full (2Years) |
| 6. |
Ratio of Apprentice to Workers |
1 : 4 |
| 7. |
Sanctioned in-take |
26 |
|
|
At the conclusion of the Period of their Training, the Trainees shall be able to perform the following skills:-
- Able to plan the survey of an extensive area and conduct the same with chain, prismatic compass, plane table or theodolite with an error of 5% or less.
- Able to enter the above in appropriate field books, make the necessary calculations. Plot the same and finish in ink and colour.
- Able to do fly leveling with an error of 0.03 per km Establish benchmarks, enter the field book reduce and check the same.
- Able to carry out topographic survey of an extensive undulated area with plane table, resection method, in combinat on with Indian pattern Clinometers, Abney level etc.
- Able to contour a given undulated area by spot level such as a site for reservoir and interpole the contours.
- Able to prepare proposals for laying a road or canal including preparation of site plan longitudinal cross sections, calculate the depth of cutting an height of embankment after proposing formation level.
- Set out a simple compound, reverse, vertical and transition curves from given data.
- Able to set out a building or culvert from given drawing.
- Able to set out a given gradient by method of gnat tracer and boning rods.
- Able to plot from given field book the plan of a given area, finish it in ink and colour, trace and prepare Ferro-print enlarge and reduce the same to required scale.
- Able to find the area of given plot.
- Able to survey of a block of 10 hectares of land containing several fields, sub division and prepare field measurement books demarcation sketch and connected records.
- Able to prepare field and village maps in different scale.
- Able to observe and compute azimuth.
- Able to prepare a detailed drawing of simple building or culvert from given sketch or specifications.
- Able to find the true North by observe ng sun and stars.
- Able to conduct the cadastral survey and plot it in the sheet as per provisional settlement map.
- Able to operate the computer, DOS, CAD, Auto CAD.
|
|
|
|
|
